Brake Tension Adjustment - Gfp 563TH Operating Manual

15. Brake Tension Adjustment

1. Adjust brake tension by turning the Tension adjustment knobs on top of each supply
shaft assembly
2. Apply only enough brake tension to remove wrinkles from the vinyl web before it enters
the nip rollers
3. Brake tension should not prevent roll from turning
Note: Excessive brake tension will cause waves, wrinkles, or a curl in the vinyl
16. Top Rewind Shaft Clutch adjustment
1. Adjust top liner rewind shaft clutch by turning the Clutch adjustment knob on the left
side cabinet
2. Apply only enough clutch tension to keep the liner rewind shaft turning with the supply
roll
Note: Excessive clutch tension will cause rewind shaft to turn faster than the
supply roll
17