Optional Rewind - Gfp 455 TH Operating Manual

Gfp 400 Series
January 2011

19. Optional Rewind

One or two sets of Rewind devices can be added to the machine as required. One
can be fixed in the rear of the machine for rewinding finished material, and
another on the front of the stand to take up backing paper from the bottom roll of
cold film when doing double-side cold lamination.
Installing the Rewind device:
1. Remove 4 screws and inserts bolted inside each side frame
2. Bolt rewind motor assembly to control side frame and rewind bracket to
opposite side frame where the inserts were located
3. Place rewind tube onto the brackets.
4. Plug rewind motor into side frame plug outlet
Operating rewind motor:
1. Select "Combine", rewind will match the speed of the laminator
2. Select "Single", rewind runs independent of laminator
3. Adjust speed of rewind with rewind speed control
4. Select "Forward" rewind motor turns clockwise
5. Select "Reverse" rewind motor turns counter-clockwise
23