17. Inserting Rewind Shafts
1. Slide a cardboard core onto the rewind shaft, Fig. 17a.
2. Set one end of the rewind shaft into the open side support bracket.
3. Align the arrow and shaft tongue with the slot in the opposite side support bracket Fig. 17b.
4. Rotate both locking outer sleeves to the closed position on the support brackets, Fig.17c.
Fig.17a
18. Feed Tray Safety Latch
1. A Feed Tray Safety latch rotates freely with the feed tray, Fig 18a.
2. Ensure latch is in the locked position whenever the feed tray is rotated to the up position, Fig.18b.
Fig.18a
19. Removing the Press Roller Assembly
1. Unscrew the knurled thumbscrews securing the left/right sides of the Press Roller Assembly,
Fig.19a.
2. Lift off and remove Press Roller assembly, Fig 19b.
Fig.19a
Gfp 663TH
Fig.17b
Safety Latch
32
April 2021
Fig.17c
Fig.18b
Fig.19b