Optional Rewind - Gfp 563TH Operating Manual

Gfp 563TH December 2012

19. Optional Rewind

One or two sets of Rewind devices can be added to the machine as required. One can
be fixed in the rear of the machine for rewinding finished material, and another on
the front of the stand to take up backing paper from the bottom roll of cold film
when doing double-side cold lamination.
Installing the Rewind device:
1. Remove 4 screws and inserts bolted inside each side frame
2. Bolt rewind motor assembly to control side frame and rewind bracket to
opposite side frame where the inserts were located
3. Place rewind tube onto the brackets.
4. Plug rewind motor into side frame plug outlet
Operating rewind motor:
1. Select "Combine", rewind will match the speed of the laminator
2. Select "Single", rewind runs independent of laminator
3. Adjust speed of rewind with rewind speed control
4. Select "Forward" rewind motor turns clockwise
5. Select "Reverse" rewind motor turns counter-clockwise
23