Additional Installation Items; Removing Print Hold Down Assembly; Inserting Rewind Shafts - Gfp 865DH Operating Manual

12. Additional Installation Items

1. Check drive chains for tightness
2. Check all drive set screws for tightness
3. Check all electrical connections and input power and test for proper operation

13. Removing Print Hold Down Assembly

1. For Roll to Roll applications and mounting, it may be necessary to remove the print
hold down assembly
2. Unscrew knurled thumb screws securing the Print hold down assembly
3. Lift off and remove assembly

14. Inserting Rewind Shafts

1. Slide a cardboard core onto the rewind shaft
2. Rotate the locking outer sleeves on both sides of the machine to the open position
3. Align the arrow and shaft tongue with the slot in support bracket on one side
4. Do the same for the opposite side support bracket
5. Rotate both locking outer sleeves to the closed position on the support brackets
Gfp 865DH February 2018
17