F. Align Machine To Stand - Gfp 563TH Operating Manual

9F. Align machine to stand

1. Screw one Alignment bolt through the alignment bracket into machine frame on the
outside of each stand leg.
Note: You may need to slide machine to align holes in machine frame with machine
stand
Alignment bolt
2. Screw two (2) Anchor bolts through the stand into the bottom of machine frame on
the inside of each stand leg
Alignment bolt
Outside stand leg
10. Additional Installation items
1. Check drive chains for tightness
2. Check all drive set screws for tightness
3. Check all electrical connections and input power and test for proper operation
13
Anchor bolts
Inside stand leg