D. Attach Lower Supply Shaft - Gfp 563TH Operating Manual

9D. Attach lower supply shaft assembly
1. Bolt bottom supply shaft assembly to the stand with 6 bolts
2. Bolt cover to supply shaft assembly
3. Bolt machine alignment brackets to the outside of machine stand
Tension knob
Cover
Bottom
supply shaft
9E. Set machine on stand
1. Lift machine from shipping skid and onto machine stand
Note: Bottom Supply Shaft on stand goes to the Front of the machine
Bottom supply shaft
Heavy! Handle with care!!
Warning: when moving the machine, you should have your hands holding on the upper supporting beam and
the rear supporting beam. Do not use roller gap adjustment hand-wheel for lifting!
Front
Machine alignment brackets
Rear
12
Top Supply Shaft