Table of Contents
Advertisement
7g. Attach upper shafts
1. Rotate the locking outer sleeves in the direction of the arrow indicated in Figure 1,
to their open position aligned with the inner sleeve as in Figure 2.
2. Insert slotted end of each upper shaft into the right shaft housing with tension adjustment
knobs and drop shaft into place as in Figure 3.
3. Rotate all outer locking sleeves to lock shafts in place
4. A cardboard core is used on upper rewind shaft to take up film liner as in Figure 4
Locking Outer
Sleeve
Figure 3
Shaft slot
Figure 1
Gfp 44TH
Figure 2
Figure 4
10
October 2017
Locking Inner
Sleeve
Cardboard rewind tube
Advertisement
Table of Contents
