Gate A20 Option; Typematic Rate Setting - AXIOMTEK EP812 User Manual

®
EP812 Pentium M All-in-One Capa Board User's Manual

Gate A20 Option

The default value is "Fast".
The A20 signal is controlled by keyboard controller
Normal
or chipset hardware.
Default: Fast. The A20 signal is controlled by Port
Fast
92 or chipset specific method.

Typematic Rate Setting

This determines the typematic rate of the keyboard. The default
value is "Disabled".
Enabled Enable typematic rate and typematic delay
programming
Disable typematic rate and typematic delay
Disabled
programming. The system BIOS will use default
value of these 2 items and the default is controlled
by keyboard.
Typematic Rate (Chars/Sec)
This option refers to the number of characters the keyboard can
type per second. The default value is "6".
6
8
10
12
15
20
24
30
Typematic Delay (Msec)
This option sets the display time interval from the first to the
second character when holding a key. The default value is "250".
38
6 characters per second
8 characters per second
10 characters per second
12 characters per second
15 characters per second
20 characters per second
24 characters per second
30 characters per second
250 250 msec
500 500 msec
750 750 msec
1000 msec
1000
Award BIOS Utility