AXIOMTEK EP812 User Manual page 45

EP812 Pentium
First/Second/Third Boot Device
These items allow the selection of the 1
that the system will search for during its boot-up sequence. The
wide range of selection includes Floppy, LS120, ZIP100, HDD0~3,
SCSI, and CDROM.
Boot Other Device
This item allows the user to enable/disable the boot device not
listed on the First/Second/Third boot devices option above. The
default setting is Enabled.
Swap Floppy Drive
This allows you to determine whether to enable Swap Floppy
Drive or not. When enabled, the BIOS swap floppy drive
assignments so that Drive A becomes Drive B, and Drive B
become Drive A. By default, this field is set to Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40
or 80 tracks, installed in the system. 360Kb type is 40 tracks
while 720Kb, 1.2MB and 1.44MB are all 80 tracks. The default
value is "Enabled".
BIOS searches for floppy disk drive to determine if it
Enabled
is 40 or 80 tracks. Note that BIOS can not tell from
720K, 1.2M or 1.44M drives type as they are all 80
tracks.
BIOS will not search for the type of floppy disk drive
Disabled
by track number. There will be no warning message
displayed if the drive installed is 360K.
Boot Up NumLock Status
This option enables and disables the number lock function of the
keypad. The default value is "On".
On Keypad functions confine with numbers
Keypad functions convert to special functions (i.e.,
Off
left/right arrow keys)
Award BIOS Utility
®
M All-in-One Capa Board User's Manual
st
, 2
nd rd
, and 3 devices
37