Project Menu - Beckman Coulter BiomekFX Quick Start Manual

3.2.1
The editors on the Project menu (Figure 3-1) allow project items to be created,
copied, revised, and renamed. They include the following:
• Labware Type Editor — allows you to add new labware types, copy
labware types, delete labware types, rename labware types, and edit labware
type properties (refer to the Biomek Software User's Manual, Chapter 8,
Creating and Modifying Tip and Labware Types).
Note:
Editor, in this quick-start guide to follow step-by-step instructions to create
new piece of labware.
• Tip Type Editor — allows you to add new tips types, remove tip types, and
change tip properties (refer to the Biomek Software User's Manual, Chapter
8, Creating and Modifying Tip and Labware Types).
• Well Pattern Editor — allows you to create and store patterns for hitting
specific wells (refer to the Biomek Software User's Manual, Chapter 12,
Creating Well Patterns).
Note:
guide to learn how to create a well pattern.
• Technique Browser — allows you to customize techniques for your
specific needs and save them for use in future methods (refer to the Biomek
Software User's Manual, Chapter 10, Understanding and Creating
Techniques).
• Liquid Type Editor — allows you to create new liquid types or to modify
existing liquid types for methods (refer to the Biomek Software User's
Manual, Chapter 9, Understanding and Creating Liquid Types).
• Pipetting Template Editor — allows you to create or modify pipetting
templates that configure the precise actions during pipetting operations
(refer to the Biomek Software User's Manual, Chapter 11, Using the
Pipetting Template Editor).
Biomek® FX and FX-P Laboratory Automation Workstations Quick-Start Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Using the Editors While Creating Methods

Project Menu

Refer to Section 3.3,
Creating New Labware in the Labware Type
Refer to Section 3.4,
Creating a New
3-3
Pattern, in this quick-start