To Delete Mac Address/Es; Mirrorport Configuration; Using Mirror Port To Monitor Traffic - Compex CGX3224 User Manual

Chapter 8 Advanced Configuration for Compex CGX3224
8.6.1

To delete MAC Address/es

If you want to delete MAC Address/es, simply
•
Click on Del
•
Hit on DeleteAll button to delete all the MAC Addresses.
8.7

MirrorPort Configuration

8.7.1

Using Mirror Port to Monitor Traffic

This function allows you to set up a 'mirror' port of any specified port/s, so
you can monitor the traffic of the monitored port/s without intervention. In
effect, the traffic on the monitored port/s are replicated on the mirror port,
allowing you to use a protocol analyzer to analyze the traffic for a specific
problem.
Procedures
1. Go to MirrorPort Config from the Command window.
2. Select one Mirror Port.
3. Click on the dashed line '–' on that particular port if you want to select it
as a Mirrored Member (T).
4. Hit on Apply button after you are satisfied with the setup. Click Save
button to update the configuration.
button for single MAC Address, or
54