Configuration - Operating Functions - JUMO LOGOSCREEN 500 Operating Instructions Manual

Operating signal
outputs

4.2.8 Configuration - Operating functions

External texts
logic input 1 — 4
External texts
logic channel 1 — 6
Key inhibit
4.2.9 Configuration - Texts
Texte
Configuration
➔ Outputs
➔ Relay K2 — K3
➔ Operating signal
Parameter
Configuration
➔ Operating functions
➔ External texts
➔ Logic input
1 — 4
Configuration
➔ Operating functions
➔ External texts
➔ Logic channel
1 — 6
Configuration
➔ Operating functions
➔ Key inhibit
Parameter
Configuration
➔ Texts
➔ Text1 — 18
4 Configuration parameters
Off,
Logic inp1 — 4,
Logic channel 1 — 6,
Low alarm 1 — 6,
Low comb. al.,
High alarm 1 — 6,
High comb. al.,
Counter/I al. 1 — 6,
C/I comb. al.,
Comb. alarm,
Memory al.,
Error,
Modbus-Flag
Value/selection
Standard text,
Text 1 — 18,
No text
Standard text,
Text 1 — 18,
No text
Off,
Logic inp1 — 4,
Logic channel 1 — 6,
Low alarm 1 — 6,
Low comb. al.,
High alarm 1 — 6,
High comb. al.,
Counter/I al. 1 — 6,
C/I comb. al.,
Comb. alarm,
Memory al.,
Error,
Modbus-Flag
Value/selection
20 characters
Text 1 — 18
The configured signal is
output to the relay.
Description
v Chapter 3.5 "Event list"
v Chapter 4.2.9
"Configuration - Texts"
Can only be used if the
"Math/Logic module"
option is available.
v Chapter 3.5 "Event list"
v Chapter 4.2.9
"Configuration - Texts"
As soon as the selected
signal is activated, the
keys are inhibited.
Description
v Chapter 3.8 "Text input"
61