Typographical Conventions - JUMO LOGOSCREEN 500 Operating Instructions Manual

1.3 Typographical conventions

1.3.1 Warning signs
V
A
E
1.3.2 Note signs
H
v
1
abc
h
The signs for Danger and Caution are used in this manual under the following
conditions:
Danger
This sign is used when there may be danger to personnel if the instructions
are disregarded or not followed accurately!
Caution
This sign is used when there may be damage to equipment or data if the in-
structions are disregarded or not followed accurately!
Caution
This sign is used where special care is required when handling electrostati-
cally sensitive components.
Note
This sign is used where your special attention is drawn to a remark.
Reference
This sign refers to further information in other handbooks, chapters or sec-
tions.
Footnote
Footnotes are notes which refer to certain points in the text.
Footnotes consist of two parts:
Marking in the text and the footnote text.
The marking in the text is arranged as continuous superscript numbers.
Action
This sign marks the description of a required action.
The individual steps are indicated by this asterisk, e. g.:
h
h Press the
key
E
h Confirm with
1 Introduction
7