Configuration - Analog Inputs - JUMO LOGOSCREEN 500 Operating Instructions Manual

4 Configuration parameters
Enable options
Enabling code

4.2.3 Configuration - Analog inputs

Sensor
Linearization
Connection circuit
Cold junction
External CJ
temperature
Range start
Range end
Start temperature
52
Configuration
➔ Instrument data
➔ Enable options
➔ Enabling code
Parameter
Configuration
➔ Analog inputs
➔ Analog input 1—6
➔ Sensor
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Linearization
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Connection circuit
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Cold junction
Configuration
➔ Analog inputs
➔ Analog input 1—6
➔ Ext. CJ temp.
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Range start
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Range end
Configuration
➔ Analog inputs
➔ Analog input 1—6
➔ Start
temperature
Enter enabling code
Value/selection
Off,
Res. therm.,
Thermocouple,
Current,
Voltage,
Math
Linear, Pt100, Pt100 JIS,
Ni100, Pt500, Pt1000,
Pt50, Cu50, Fe-Con J,
NiCrCon E, Ni-CrNi K,
NiCrSi N, Cu-Con T,
PtRhPtRh B,
PtRh-Pt R, PtRh-Pt S,
Cu-Con U, Fe-Con L,
W3W25Re, W5W26Re
2 — 4 wire
Internal Pt100,
External const
-50 to +150°C
any value
0mA
any value
20mA
any value
Enter the enabling code
you have received here.
Description
Depending on the select-
ed sensor, only the relevant
parameters can be
selected for configuring the
analog input.
External cold junction tem-
perature for thermocouples
Only for sensor types:
current, voltage with linear-
ization for resistance ther-
mometer, thermocouple.
Only for signals which are
not yet linearized.