JUMO LOGOSCREEN 500 Operating Instructions Manual page 55

End temperature
Scaling start
Scaling end
Filter constant
Channel name
Unit
Decimal place
Line width
Alarm
Low limit
High limit
Parameter
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ End
temperature
Configuration
➔ Analog inputs
➔ Analog input 1—6
➔ Scaling start
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Scaling end
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Filter constant
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Channel
name
Configuration
➔ Analog inputs
➔ Analog input 1—6
➔ Unit
Configuration
➔ Analog inputs
➔ Analog input 1—6
➔ Decimal place
Configuration
➔ Analog inputs
➔ Analog input 1—6
➔ Line width
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Alarm
➔ Alarm
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Alarm
➔ Low limit
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Alarm
➔ High limit
4 Configuration parameters
Value/selection
any value
-99999 to 0 to +99999
-99999 to +100 to +99999
0.0 to 0.1 to 10.0s
7 characters
Inp. 1
5 characters
%
Automatic,
X.XXXX, XX.XXX,
XXX.XX, XXXX.X,
XXXXX.
Thin,
Thick
Off,
Activated
-99999 to 0 to +99999
-99999 to 0 to +99999
Description
Only for sensor types:
current, voltage with linear-
ization for resistance ther-
mometer, thermocouple.
Only for signals which are
not yet linearized.
Short designation. It is
shown in the channel line
(header) with bargraph and
scaling.
v Chapter 3.8 "Text input"
v Chapter 3.8 "Text input"
Automatic: representation
with max. resolution
Line width of the measure-
ment curve within the
graphical display
53