Math And Logic Module - JUMO LOGOSCREEN 500 Operating Instructions Manual

5.4 Math and logic module

A
Mathematics
The math and logic module is available as an extra from instrument software
133.03.xx.
The math and logic module are channels that are not available as hardware
but are calculated by the instrument software.
If a math channel is used (e.g. math channel 3), the corresponding analog
channel (e.g. AE3) is no longer available.
This does not apply to the logic channels.
You can activate math channels in the setup program under "Analog inputs"
(or via Menu ➔ Edit analog inputs).
In the example below, channel 3 is being used as math channel:
1.) Channel selection
After carrying out steps 1.) and 2.), you have to start the math formula editor 3.).
5 Setup program
2.) Select
Mathematics
3.) Define formula
69