6.1
Operating modes and status
Operating mode/status
Basic status
Stop
Stop by key
Chart speeds
Normal chart speed
6 Preparation
Notes
Basic status of the pen recorder with signal acquisition
and processing.
The display shows
- time (can be switched off via the parameter
parameter level
- and system error messages, where appropriate.
In the stop status the display flashes "
If there is a system error message, it is shown flashing
at regular intervals instead of the time.
Recording is stopped and continued using key
In the stop status, the display flashes "
The chart is advanced with the speed programmed
under chart speed.
Section 8.3
17
display time)
StOP
".
S
.
StOP
".