Configuration - Event Traces - JUMO LOGOSCREEN 500 Operating Instructions Manual

4 Configuration parameters
Differential
Text low alarm
Text high alarm
Alarm delay

4.2.4 Configuration - Event traces

Input signal
54
Parameter
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Alarm
➔ Differential
(1) = Low limit
(2) = High limit
(3) = Differential
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Alarm
➔ Text
low alarm
Configuration
➔ Analog inputs
➔ Analog input 1—6
➔ Alarm
➔ Text
high alarm
Configuration
➔Analog inputs
➔ Analog input 1—6
➔ Alarm
➔ Alarm
delay
Parameter
Configuration
➔ Event traces
➔ Event traces 1 — 4
➔ Input signal
Value/selection
-99999 to 0 to +99999
Standard text,
Text 1 — 18,
No text
Standard text,
Text 1 — 18,
No text
0 — 32767s
Value/selection
Off,
Logic inp1 — 4,
Logic channel 1 — 6,
Low alarm 1 — 6,
Low comb. al.,
High alarm 1 — 6,
High comb. al.,
Counter/I al. 1 — 6,
C/I comb. al.,
Comb. alarm,
Memory al.,
Error,
Modbus-Flag
Description
v Chapter 3.5 "Event list"
v Configuration ➔ Texts,
page 61
Alarm delay is activated at
a value of > 0.
When activated, an alarm
will only be generated
when it has been present
for at least as long as it
takes for the set time to
elapse.
Description
The event (digital signal)
which is to be recorded is
assigned to an event trace.