Table of Contents
Advertisement
3.3 Parameter setting
H
Contrast
Speed
indication
Display
off
The "Parameter" level is available to set
- contrast,
- speed indication,
- display off,
- diagram view and
- counter/integrator reset.
All parameters are selected using the
The contrast of the screen can be set here. This ensures that the screen is al-
ways legible, even under difficult light conditions.
Here, "mm/h", "time/div" or "storage rate" is selected for the speed display in
the diagram.
Example: A diagram speed of 1h/div corresponds to approx. 22mm/hr.
Switch-off event = waiting time
For screen saving, a time between (0 and 32767min) can be set under the pa-
rameter "Waiting time". If no recorder key is operated during this time, then the
screen goes dark. The power LED blinks during screen saving.
If 0min is set, then screen saving is deactivated.
3 Operation and visualization
or
and
and
keys.
33
Hide quick links:
Advertisement
Table of Contents
