Table of Contents
Advertisement
3 Operation and visualization
3.9 Code number (password entry)
H
Password
request
44
The following functions are protected ex-factory from unauthorized access by
a password request:
- the Configuration menu
- parts of the Disk manager menu
- the Parameters ➔ Counter/Int. reset menu
The factory default setting is 9200.
A password can also be used to secure access to the recorder via the serial in-
terface. In this case, however, the factory setting is 0 (no password request). If
you enter a value unequal to 0, please take into account that this number must
also be sent to the recorder by an attached communication program.
Additional information on password request
for the serial interface can be found in the
Interface Description B 95.5015.2.
All passwords can be programmed differently (see Chapter 4.2.2
"Configuration - Instrument data").
Increment (+1) or
decrement (-1) the
selected digit
After the entry has been completed (
E
the
key. Using
menu left.
Select the digit to
be altered
D
, the password request will be stopped and the
), it can be confirmed by using
Hide quick links:
Advertisement
Table of Contents
