Table of Contents
Advertisement
2 Instrument description
Outputs
External texts
Event operation
2.5 Counters / Integrators / Timers
14
The digital signals can be used to operate the three relays (extra code). It is
possible
to
configure
(Configuration ➔ Outputs).
So-called "external texts" can be arranged through four logic inputs. Either a
standard text or one of the 18 definable texts can be used. The instrument au-
tomatically supplements the texts in order to distinguish between the appear-
ance and disappearance of the signal. The external texts are configured on the
instrument under Configuration ➔ Operating functions.
v Chapter 3.5 "Event list"
The digital signals can be used to activate event operation. In event operation,
the measurements are stored at a storage rate which is different from that in
normal operation.
Counters, integrators and timers are available as extras from instrument soft-
ware 133.03.xx.
These are not electrical measurement inputs (hardware), but channels which
are calculated by the recorder (software).
the
action
as
n.c.
(break)
or
n.o.
(make)
Hide quick links:
Advertisement
Table of Contents
