CM4 Four-Point Continuous Monitor
forward/backward to the next/previous event stored
•
ENTER to re-scroll the event just displayed
PT 1
12/27/95 09:31 L2
Alarm history is not cleared using the RESET key.
Press RESET to return to the Review menu.
6.3 Function 2.2 – Fault History
Use the fault history function to print and display the eight most recent
faults and alarms.
6.3.1 Print Fault History
See
Figure 6-3
for a typical example of a fault history printout.
Purpose
The printout of the fault history shows the most recent fault first for up
to eight total faults. The printout includes:
•
Instrument serial number
•
Current date and time
•
Customer name and location
•
Fault number (FXX)
•
Fault type
•
Fault date and time
Instructions
1. Press PROGRAM to exit Monitor Mode.
2. From the 2–REVIEW MENU, choose the subfunction 2–FAULT
HISTORY.
CM4 Technical Manual
or
56 PPB ASH3
2 – REVIEW MODE
2 – FAULT HISTORY
The display reads:
1 = DISPLAY 2 = PRINT
3. Press 2 to print the fault history.
The CM4 sends the fault history to the printer.
08/26/05 13:51 CM4-851-0000 FAULT HISTORY
ABC MANUFACTURING CO., CHICAGO, IL
08/26/05
10:34
08/25/05
09:15
07/26/05
08:33
06/21/05
15:50
Figure 6-3: Typical Fault History Printout
Fault history is not cleared using the RESET key.
6.3.2 Display Fault History
Purpose
The fault history display shows fault:
•
Number
•
Name
•
Date and time
Instructions
1. Press PROGRAM to exit Monitor Mode.
2. From the 2–REVIEW MENU, choose the subfunction 2–FAULT
HISTORY.
6-4
F12
END OF CASSETTE
F8
Chemcassette
SUPPLY LOW
F9
GATE OPEN DURING
MONITOR
F15
FLASH CARD ERROR