Download Print this page

Function 2.6 – Print Configuration - Honeywell CM4 Technical Handbook

Four-point continuous monitor
Hide thumbs

Advertisement

Table of Contents
CM4 Four-Point Continuous Monitor
The display reads:
1 = DISPLAY 2 = PRINT
3. Press 1 to display the customer data. Press 1 again to alternate
between the two lines of customer data.
ABC MANUFACTURING
CHICAGO, ILL
Press RESET to return to the Review Menu
6.7 Function 2.6 – Print Configuration
Purpose
Use the Print Configuration function to print the preprogrammed
system configuration, including:
Serial number
Customer name and location
Date and time
All configuration information
See
Figure 6-6
for a typical printout.
The CM4 only prints the data. Data is not displayed.
Instructions
1. Press PROGRAM to exit Monitor Mode.
2. From the 2–REVIEW MENU, choose the subfunction 6–PRINT
CONFIGURATION.
2 – REVIEW MODE
6 – PRINT CONFIG
Use the Set-Up Menu to change any configurable parameters shown
on the printout (see
Section
7).
CM4 Technical Manual
The CM4 prints the system configuration information, shown on the
sample printout in
Figure
6-6.
6.8 Function 2.7 – Instrument Serial Number
Purpose
Use the Instrument Serial Number function to display the CM4 serial
number. Being able to display the instrument serial number avoids the
necessity of looking behind the instrument to retrieve the serial number
when placing a call to Honeywell Analytics for information or service.
It is always a good idea to write the serial number and file it for future
reference. This information appears in TWA and other printouts.
Instructions
1. Press PROGRAM to exit Monitor Mode.
2. From the 2–RE VIE W MENU, choose the subfunc tion
7–INSTRUMENT SERIAL NUMBER.
2 – REVIEW MODE
7 – INST SER NUMBER
The display shows the instrument serial number:
Press RESET to return to the Review Menu.
For the CM4-P, the letter "P" replaces the hyphen used in standard
CM4 serial numbers, i.e. 851P000X for a CM4-P instrument, and
851-000X is a standard CM4 serial number. This designation appears
on all printouts, point IDs, and displays in which the instrument
identification is used.
6-8
SERIAL #851-0000

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell CM4