Error And Fault Messages - Honeywell Bendix/King KMD 850 Pilot's Manual Addendum

ERROR AND
FAULT MESSAGES
If the KMD 850 is not
receiving any data from the
weather radar sensor, the
following message will be
displayed and the radar icon
will be shown with a red
circle and slash through it.
This may indicate that the
radar is not receiving primary
power (e.g. an open circuit
breaker), a problem in the
wiring connection between
the radar and the MFD dis-
play, or a faulty radar.
Any self test failures reported
by the radar such as TxFLT
will be displayed in the Fault
Message Window in the
bottom left corner of the dis-
play.
The following table defines the possible fault messages displayed in the
Fault Message Window.
12
Rev 2 Jan/2002
KMD 850 Wx Radar Addendum