CM4 Four-Point Continuous Monitor
3.5.1 Wall Mount
Figure 3-2 shows wall mounting orientation and dimensions. The
mounting kit supplied by Honeywell Analytics includes all hardware
and fasteners shown except for wall anchors. Here are important
installation points:
•
For detailed installation prints, ask for MDA drawing
#874014-I
•
Use appropriate anchors to secure brackets to wall
•
If installing multiple CM4s, allow a minimum 8 inch vertical
separation between brackets
•
Make sure brackets are securely fastened and level before
locking instrument in position
CAUTION
The CM4 weighs about 50 pounds (23 kg). Make sure all installation
steps and handling procedures are done with protection and safety
margin for this load.
CM4 Technical Manual
Figure 3-2: Wall Mount
3-5
16.0
(406.40)
16.25
(412.75)
8.0
(203.00)