Function And Cursor Keys - Honeywell CM4 Technical Handbook

CM4 Four-Point Continuous Monitor

3.15 Function and Cursor Keys

This section describes function keys and cursor keys.
3.15.1 MONITOR
Press MONITOR to initiate monitoring.
3.15.2 PROGRAM
Press PROGRAM to exit the Monitor Mode.
3.15.3 RESET/ESCAPE
Press RESET to reset all CM4 alarm and fault LEDs and relays. Also,
press RESET to escape from subroutines.
3.15.4 ENTER
Press ENTER to confirm configuration changes.
3.15.5 CURSOR ARROW LEFT/RIGHT
Press CURSOR ARROW LEFT/RIGHT to:
• Scroll the display forward/backward to access menus and
functions
• View and configure CM4 operating parameters, including
calibrating, reviewing alarm history, reviewing configuration,
setting-up for operation, and servicing the instrument.
CM4 Technical Manual 3-15