Flat Field Category; Flat Field Control Feature Description - Teledyne Piranha4 User Manual

Piranha4 RGB + NIR / Mono Camera User's Manual

Flat Field Category

The Flat Field controls, as show n by CamExpert, group parameters used to configure camera pixel
format, and image cropping. A dditionally a feature control to select and output an internal test image
simplifies the process of setting up a camera w ithout a lens.
Parameters in gray are read only, either alw ays or due to another parameter being disabled. Parameters
in black are user set in CamExpert or programmable via an imaging application.
Features listed in the description table but tagged as Invisible are usually for Teledyne DA LSA or third
party softw are usage—not typically needed by end user applications.

Flat Field Control Feature Description

The follow ing table describes these parameters along w ith their view attribute and minimum camera
firmw are version required. A dditionally the firmw are column w ill indicate w hich parameter is a
member of the DA LSA Features N aming Convention (DFN C), verses the GenICam Standard Features
N aming Convention (SFN C not show n).
The Device Version number represents the camera softw are functional group, not a firmw are revision
number.
Display Name
M ode
Off
Teledyne DALSA
Feature
flatfieldCorrectionM ode
Off
Description
FPN and flat field coefficients
disabled.
69
Device
Version
& View
1.00
Beginner
03-032-20217-01