Acquisition And Transfer Control Category; Acquisition And Transfer Control Feature Descriptions - Teledyne Piranha4 User Manual

82

Acquisition and Transfer Control Category

The A cquisition and Transfer controls, as show n by CamExpert, groups parameters used to configure the
optional acquisition modes of the device. Parameters in gray are read only, either alw ays or due to
another parameter being disabled. Parameters in black are user set in CamExpert or programmable via an
imaging application.
Features listed in the description table but tagged as Invisible are usually for Teledyne DA LSA or third
party softw are usage—not typically needed by end user applications.

Acquisition and Transfer Control Feature Descriptions

The follow ing table describes these parameters along w ith their view attribute and minimum camera
firmw are version required. A dditionally the firmw are column w ill indicate w hich parameter is a
member of the DA LSA Features N aming Convention (DFN C), versus the GenICam Standard Features
N aming Convention (SFN C not show n).
Display Name
Device DeviceRegistersStreamingStart
Registers
Streaming Start
Device DeviceRegistersStreamingEnd
Registers
Streaming End
03-032-20217-01
Feature
A nnounces the start of registers streaming
w ithout immediate checking for
consistency.
A nnounces end of registers streaming and
performs validation for registers
consistency before activating them.
Piranha4 RGB + NIR / Mono Camera User's Manual
Description Device
Version
& View
1.00
Beginner
DFN C
1.00
Beginner
DFN C
Teledyne DALSA