Set Baud Rate; Pixel Format - Teledyne Piranha4 User Manual

Piranha4 RGB + NIR / Mono Camera User's Manual
Control the size of the transmitted image
Width
H eight

Pixel Format

Test Image Selector

Set Baud Rate

The baud rate sets the speed (in bits per second—bps) of the serial communication port and is available as
part of the Serial Port Control parameters.
Action
Control the baud rate used by the
camera's serial port
N umber of bits per character used in the
serial port
Parity of the serial port
N umber of stop bits per character used
in the serial port
Pixel Format
Use the Pixel Format feature, found in the I mage Format Control set, to select the format of the pixel to
use during image acquisition.
Teledyne DALSA
Image Format Control
Width of the image.
H eight of the image in lines.
8 bit depth to Camera Link.
Select an internal test image:
Off
Color Ramp
Grey Ramp
Serial Port Control
Parameter
Baud Rate
Data Size
Parity
N umber of Stop
Bits
Options
9600 (factory default)
19200
57600
115200
230400*
460800*
921600*
Note: During connection CamExpert
automatically sets the camera to
maximum allow able baud.
*Your system requires a Px8 frame
grabber to achieve these baud rates.
8
N one
1
51
03-032-20217-01