Pls2(887) Settings To Move From Origin To Position A; Pls2(887) Settings To Move From Position A To Position B - Omron CP1L-EL20DR-D Operation Manual

Pulse Outputs
306
■ DM Area Settings
Starting Frequency
Setting details
X-axis starting frequency
Y-axis starting frequency

PLS2(887) Settings to Move from Origin to Position A

Setting details
X axis Acceleration rate: 2,000 Hz/4 ms
Deceleration rate: 2,000 Hz/4 ms
Target frequency: 100,000 Hz
Number of output pulses: 5,000 pulses
Y axis Acceleration rate: 2,000 Hz/4 ms
Deceleration rate: 2,000 Hz/4 ms
Target frequency: 100,000 Hz
Number of output pulses: 5,000 pulses

PLS2(887) Settings to Move from Position A to Position B

Setting details
X axis Acceleration rate: 2,000 Hz/4 ms
Deceleration rate: 2,000 Hz/4 ms
Target frequency: 100,000 Hz
Number of output pulses: 25,000 pulses
Section 7-2
Address Data
D0 0000
D2 0000
Address Data
D10 07D0
D11 07D0
D12 86A0
D13 0001
D14 1388
D15 0000
D20 07D0
D21 07D0
D22 86A0
D23 0001
D24 1388
D25 0000
Address Data
D30 07D0
D31 07D0
D32 86A0
D33 0001
D34 61A8
D35 0000