Set Up Of The Hardware For Repeater Programming; Programming The Spectralink Dect Repeater With The Service Tool - SpectraLink IP-DECT Server 400 Installation And Configuration Manual

Hide thumbs Also See for IP-DECT Server 400:

Table of Contents

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

USB cable

Set up of the Hardware for Repeater Programming

It is recommended that you carry out the set up in the following order:

1. Unplug the repeater power supply adapter and insert the splitter.

2. Connect the repeater power supply adapter to the splitter and the mains. LED flashes.

3. Connect the USB cable to the programming tool.

4. Download the Service Tool from

puter.

The repeater is now ready for programming via the Service Tool.

The Service Tool is the tool you access from your desktop and use for repeater programming, hand-

set adjustment and software download to the handset and repeater. For more information about pro-

gramming the repeater with the Service Tool, refer to the Help File in the Service Tool.

The Service Tool identifies the type of repeater, and with this software it is possible to program the

Spectralink DECT Repeater to connect to the Spectralink DECT Radio Infrastructure solutions.

Note:

Before you start programming the repeater, ensure that the repeater is connected to the

computer and the mains.

14215700-IG, Edition 7.0

January 2018, Original document

http://support.spectralink.com/

and install it on your com-

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the IP-DECT Server 400 and is the answer not in the manual?

Ip-dect server 6500