Manually Ip-Dect Server Address Configuration For Media Resources - SpectraLink IP-DECT Server 400 Installation And Configuration Manual

Spectralink IP-DECT Server 400/6500 Installation and Configuration Guide

Manually IP-DECT Server Address Configuration for Media Resources

Note:
Not relevant to the Spectralink IP-DECT Server 400.
To configure the IP-DECT server address manually through the web based Administration Page of
the media resource:
1. Open a browser, and enter the static IP address of the media resource.
2. Click Configuration, and then click Media Resource.
3. On the Media Resource Configuration page, enter the following data:
Field
Media Resource - Wireless Server Host
Server
4. Click Save.
5. Click Reboot to enable the configuration changes.
14215700-IG, Edition 7.0
January 2018, Original document
Setting
Enter the address of the Spectralink IP-DECT Server
that the media resource must connect to.
97