Select Standard Setting; Call Up Data From The Program Library - KERN MLS 50-3IR160 Instruction Manual

9.8 Select standard setting

In this setting all sample values (temp., profile, etc..) are switched to values preset in
MLS50-3.
Operator
Actuate -key, use the cursor (►) to select the
desired parameter ("standard")
Actuate the
activated
Use the key to accept the standard setting for the sample; with the
setting remains valid.

10 Call up data from the program library:

Operator
Turn on MLS50-3 on main switch (rear side)
Actuate the
Actuate the -key, use the cursor (►) to select
the saved process
Push -button
All set values are displayed.
Moisture analyzing can be started with the
key.
116
-key, selection "standard" is
-key to open the library
Indication
Indication
-
MLS-BA-defsi-0713
key the old