Select Interval Of Data Output - KERN MLS 50-3IR160 Instruction Manual

9.5 Select interval of data output

The user can determine which interval is used for data output.
Operator
Actuate -key, use the cursor (►) to select the
desired parameter (e.g. "Printout interval")
Actuate the
time"
The following selection criteria are available:
Printout after 1 second – 5 minutes selectable
No printout
Select and save settings:
Use the , keys and
desired printout times.
MLS-BA-defsi-0713
-key to open selection "Printout
(Enter) to select the
indication
113