Communication Parameters; Select Standard Setting - KERN ABP Set Up And Operating Manual

15.7 Communication parameters

All communication parameters will be set (See chap. 15.7.1) by calling a standard
setting.
The subsequent standard setting must be selected according to the printer (details
see the following table).
All parameters may be of course also set in a user specific way (See chap. 15.7.2).
Menu
Standard
selection
Manufactu Shimadzu
rer (Standard)
Baud
1200
Rate
Parity None (8)
Stop bit 1
Hand-
Hardware
shake
Data Shimadzu
format Standard
Separator C/R
*only if the balance can send a feedback to the PC (without error: OK [C/R], at error NG [C/R].
15.7.1

Select standard setting

1. Call function
Press and hold PRINT-key for approx. 3 sec.
Use the navigation keys to select
<Communication setting> and confirm using
the OK-key.
Use the navigation keys to select interface
and confirm using the OK-key.
110
Extended Type M
Shimadzu
Mettler
*
1200 2400
None (8) Even (7)
1 2
Hardware off
Shimadzu Mettler
Standard Standard
C/R C/R + L/F
Type S Type A
Sartorius A-D
1200 2400
Odd (7) Even (7)
2 2
Hardware off
Sartorius A-D
Standard Standard
C/R + L/F C/R + L/F
User setting
- Setting
for KERN
-
YKB-01N
user-
9600
defined
user-
None (8)
defined
user-
1
defined
user-
off
defined
user-
FREE
defined
user-
C/R
defined
ABP-BA-e-1810