KERN MLS 50-3IR160 Instruction Manual page 20

The display will show the weighing value for the
adjusting weight set by you
Now place the adjusting weight in the center of the
weighing plate, press the
adjustment the system will automatically return to
the menu.
Remove adjusting weight.
The -key can be used to cancel the adjustment.
In case of an adjustment error or incorrect adjusting
weight an error message is displayed. Repeat
adjustment.
Actuate -key twice
Use the - key to confirm; the balance will
automatically return to weighing mode
We recommend:
Carry out adjustment as close to the maximum load of the balance as possible.
Information concerning the test weights is available at:
86
key. After successful
http://www.kern-sohn.com
MLS-BA-defsi-0713