As soon as you have activated the "program library" you will be taken into the
program library whenever you start a drying process.
To deactivate it you must first switch the previously set selection "1=yes" to
"0= no".
In the library the following parameters can be stored:
Sample name (e.g. powder)
Profile of the heating method (e.g. Soft)
Drying temperature
Conclusion
Results
Output interval
Size of the sample (g)
Correction value
Allocate library parameters:
Operator
Actuate the
open the library
Actuate
-key, use the
cursor (►) to select the
desired position of the
process
Push
-button
Push
-button
Actuate
-key, use the
cursor (►) to select the
desired setting.
Actuate the
name)
Use the keys
and
(Enter) to enter
the sample name.
MLS-BA-defsi-0713
Indication
-key to
-key (e.g.
,
109