interSeptor Pro
6.2.1 System Group Configuration
From the configuration
address and other group parameters. The definitions of these parameters are listed below (see Figure
6-2).
No Function
1. IP Address
2. Gateway Address
3. Network Mask
After completing these settings, press "0" to return to the configuration menu.
6.2.2 Control Group Configuration
From the configuration menu, press "2" to modify the access password and enabled/disabled status of
the available network protocols (see Figure 6-3)
34
menu,
press "1" to select this function and set the IP address, gateway
Figure 6-2: System Group Configuration Menu.
Description
The interSeptor IP address.
The network default gateway. 192.168.1.254
The sub-net mask setting.
Figure 6-3: Control group Configuration menu
Example/Remark
192.168.1.69
255.255.255.0