Page 1
Quick Installation Guide V 1.1 T. +44 (0) 1672 511125 Email: support@jacarta.co.uk...
Page 2
3. Connect one end of the supplied interface cable to any of the device board ports on the front of the interSeptor Pro and the other end to the RJ45 port on the Temperature and Humidity Probe (EMD). 4. Insert one end of the power connector to the AC-In socket on the rear of the interSeptor Pro.
Page 3
Gateway: 192.168.1.254 To change these settings prior to network communication please follow the following instructions: 1. Press the Set button on the front of the interSeptor Pro so System Config displays on the LCD screen. 2. Press the Set button.
Page 4
Pro Alert Centre (Voice and SMS)-UK only The Jacarta Alert Centre facility is a subscription-based service that works in conjunction with our interSeptor Pro to provide automatic alarm notification via email, SMS and voice alarm messages (to landline or mobile phones) to up to 6 recipients.