interSeptor Pro
3.4.3 System Control
This page allows you (as administrator) to enable or disable the communication protocols available in
the interSeptor Pro, or assign a different port number for the communication protocol. You can also
click the Reset to Default button to reset all default configurations for the interSeptor Pro, or the
restart interSeptor Pro button to restart the interSeptor Pro.
3.4.4 Access Control
This page allows you (as administrator) to add SNMP NMS stations specified for read-only,
read/ write, or restricted access to the interSeptor Pro.
20
Figure 3-13 System Control
Figure 3-14 Access Control