3.3 Device Management
The Device Management menu allows the configuration of EMD sensors, Dry contact sensors, and
output controls connected to each of the device boards on the interSeptor Pro.
There are six sub-menus in the Device Management menu:
Device Board-1
Schedule of Device Board-1
Device Board-2
Schedule of Device Board-2
Device Board-3
Schedule of Device Board-3
3.3.1 Device Board Screens
The Device Board-1, Device Board-2, and Device Board-3 screens allow you (as administrator) to
configure settings and alarm schedules for eight EMDs (maximum) on each device board.
Figure 3-7 Device Management: Device Board 1
Figure 3-8 Device Board 1
Note: The following instructions apply for each of the
Device Board-1, Device Board-2, and Device
Board-3 screens.
Monitoring interSeptor Pro
15