Table of Contents
Advertisement
Mail Recipient: - The e-mail address for the e-mail to be sent to.
Mail Cc1-5:- Up to five additional e-mail addresses may be added.
When you have filled in the required fields remember to click "Save".
d) At the bottom of the page is the „Mail Status‟ section.
Status of most recent Mail: - This can be either "No Status" "Success" or "Failure"
Last Error Message: - This is a debugging aid. If the email is not successfully sent, the reason
may be found here.
Test Email: - Useful when the SMTP settings are first setup to ensure the e-mail is working, or
anytime thereafter. Before a test mail can be generated ensure the previous fields described have
been completed.
5) System settings
1. Network settings
The network settings page allows configuration of network settings for the unit such as the IP
address.
To get to the entry point of this tutorial complete the following:-
1) Point a web browser to the IP address of the unit
2) Log in as administrator
3) From the settings page, select the network tab.
a) After clicking the "Network" tab the following page is displayed:-
- 12 -
SP8 Manual
Advertisement
Table of Contents
