Digital Output Control; Access Control Table Configuration - jacarta interSeptor Pro User Manual

6.2.10 Digital Output control

Shows the digital output control screen this displays the current state of each output which can be
changed manually using option '1. Modify'. (See Figure 6-11)

6.2.11 Access Control Table Configuration

If you wish to use a workstation with an SNMP manager installed, or if you wish to set more
restrictive interSeptor Pro access, you can use the access table to add the IP addresses of the PC's
on which you wish to modify the access permissions (see Figure 6-12).
NOTE: The configuration of Access Control Table is configured for SNMP and HTTP
Network Management. Access through TELNET is permitted only when using the
"Community Read/Write" password in Control Group.
NOTE: If a "NotAccess" access right is associated with an IP address, the associated
workstation will not be able to display any information regarding the interSeptor, even if the
Community Read-Only string is entered.
Figure 6-11 Digital Output Control Table
Figure 6-12 Access Control table
Configuration
39