Appendix C. Changing Baud Rate For Gsm Modem - jacarta interSeptor Pro User Manual

interSeptor Pro
Appendix C.
Most of the external GSM modems should auto detect the baud rate to use. If not please follow these
steps:
Connect your external GSM modem to a PC through the serial cable.
Access the external GSM modem via HyperTerminal on your PC (instructions will come with the
modem).
Set the desired baud rate with the following command:
at + ipr = 38400 (press enter)
Then reconnect HyperTerminal using the new baud rate.
Now make the changes permanent with the following command.
at&w (press enter)
You should now be able to send SMS messages from your interSeptor Pro using your external GSM
modem.
If you require any assistance please contact support@jacarta.co.uk.
44
Changing Baud rate for GSM modem
Jacarta Ltd
Wagon Yard, London Road
Marlborough, Wiltshire
SN8 1LH
United Kingdom
Tel: +44(0)1672 511125
www.jacarta.co.uk