Table of Contents
Advertisement
interSeptor Pro
Appendix B. Firmware Upgrade
B1
General Information
To perform firmware upgrade, the InterSeptor Pro must be connected to the same network as the
workstation from which the file is to be sent. You must have administrator status and have the read/
write authority for the interSeptor Pro.
B2
Updating interSeptor Pro firmware via Upgrade.exe
1. Open the upgrade.exe from the upgrade folder on the CD provided with the interSeptor Pro pack.
2. Click the Discover button to discover the interSeptor pro installed on the network.
3. Click the open button and select the firmware to be upgraded.
42
Figure B-1 upgrade.exe page
Figure B-2 upgrade.exe open page
- Quick Links:
- Access Control
Hide quick links:
Advertisement
Table of Contents
