4.3 Extended History Log Monitor
Click the
button in the top right-hand corner of the interSeptor Pro home page to display the
EMD Extended History Log Monitor. This monitor shows the EMD extended history log in line graph.
By default, all the EMD parameters will be shown on the same graph. You can select any combination
of the parameters to be displayed on the graph by checking the check box next to each parameter on
the monitor screen. Click the Refresh button to apply the changes.
Minimum
Average
Maximum
Refresh
Reload
Exit
Left Display Margin
Right Margin Scroll Bar
Figure 4-4 Extended History Log Monitor
Display the minimum values of the temperature,
humidity, or voltage of the EMDs, sensors, and the
output devices.
Display the average values of the temperature,
humidity, or voltage of the EMDs, sensors, and the
output devices.
Display the maximum values of the temperature,
humidity, or voltage of the EMDs, sensors, and the
output devices.
Click the Refresh button to apply the changes
made to the parameters.
Update the monitor and reset the right display
margin.
Close the window.
Monitoring interSeptor Pro
Right Display Margin
31