Table of Contents
Advertisement
interSeptor Pro
3.4.7 Sending SMS (Using a GSM Modem)
This page allows you (as administrator) to configure the SMS settings for sending messages to
recipients when events occur.
Follow the steps below to add/edit/delete a short message.
1. You have to connect the GSM modem to interSeptor Pro, as shown below:
2. Set the GSM modem function to ENABLE.
Configure the following settings to enable/disable the GSM modem:
GSM Modem Function: Choose Enable/ Disable to enable or disable the GSM Modem
Function. Up to twelve phone numbers maximum
Authentication and Pin Code: If the SIM card is locked by PIN code, tick Authentication
and enter the correct Pin Code into Pin Code.
Set Value: Press the Set Value button to confirm.
22
Figure 3-17 Connect GSM modem to interSeptor Pro
Figure 3-18 SMS configuration page
Info: A GSM Modem is required for this functionality.
Please ensure that the baud rate for the modem is
38400. Please see Appendix C
- Quick Links:
- Access Control
Hide quick links:
Advertisement
Table of Contents
