Introduction; Features - jacarta interSeptor Pro User Manual

interSeptor Pro
1

Introduction

The interSeptor Pro is a Network device designed for remote monitoring of temperature, humidity, and
status of up to 24 environmental monitoring devices (EMDs) via a standard web browser, Network
Management System (NMS) and Telnet. Alerts can be provided via email, SNMP, and telephone
voice & SMS via the Jacarta Alert Centre Service (registration required). Alternatively SMS alerts can
also be transmitted using a GSM modem (not supplied).
1.1

Features

The interSeptor Pro supports the following features:
Temperature and Humidity monitoring
•
You can monitor the temperature and humidity of any desired environment to protect critical
equipment.
Contact closure status monitoring
•
You can monitor the status of up to forty-eight (48) volt free dry contact devices to protect your
critical equipment.
The interSeptor Pro functions can be configured from any client (password protected)
•
You can set the interSeptor Pro settings from any SNMP management station or by web browser
using HTTP forms and objects.
E-mail notification
•
Supports e-mail notification through SMTP via e-mail client software, when alarms are triggered
or contact status changes.
History logs and events
•
When the temperature and humidity values exceed the user-defined limits, or the status of the
contact closure changes, the logs are recorded in the History Log of the interSeptor Pro.
Optional Sensors
A range of Jacarta Sensors including Smoke, Security, Water leak and Power are available for
connection to the interSeptor Pro.
Hot-swapping
•
You can install the EMDs safely without powering down the InterSeptor Pro.
Telephone Voice & SMS Alerts available via Jacarta Alert Centre (UK only)
•
SMS
•
This is an integrated facility that requires an additional external GSM modem, by connecting the
GSM modem the interSeptor Pro SMS Messages can be sent to up to 12 contacts. Please refer
to "3.4.7 Sending SMS (Using GSM Modem)" for more detailed information.
6
Note: There are currently 3 interSeptor Pro versions
available. 8, 16 and 24 port.
Introduction