Configuration; About This Section; Overview Of Configuration - ABB COM600 User Manual

3.
3.1.
3.2.
14
Station Automation COM600 3.4
DNP 3.0 LAN/WAN Slave (OPC) User's Manual

Configuration

About this section

This section guides you in the configuration tasks required before you can start using
the DNP LAN Slave OPC Client. For information on the IEC 61850 data modeling, refer
to COM600 User's Manual.
Start Station Automation Builder 600 (later referred to as SAB600) to open a project
where at least one OPC server has been configured. You can also open and name a new
project, where you configure at least one OPC server.
1. Select File > Open/Manage Project....
2. In the Open/Manage Project dialog, select the required location for the project:
• Projects on my computer
• Projects on network
3. Select New Project on the left.
• Enter a Project Name. The Description is optional.
4. Click Create.
5. Click Open Project.

Overview of configuration

Before you can start using the DNP LAN Slave OPC Client, you need to build and con-
figure an object tree in SAB600 to define the Communication structure within the
Gateway object.
•
DNP LAN Slave OPC Client
•
DNP LAN Channel
•
DNP LAN IED
• Data objects
Figure 3.2-1 shows an example view of SAB600 including an object tree in the commu-
nication structure on the left and Object Properties window displaying the object properties
on the right.
When configuring OPC servers the following characters cannot
be used in object names: \ ` ' ' #
1MRS755496